MeanWell 300W 60A 5V Switching Power (NES-350-5)
$39.00
In stock
SKU
NES-350-5
MeanWell 300W 60A 5V Single Output Switching Power Supply (NES-350-5)
Product Name:
MeanWell 300W 60A 5V Single Output Switching Power Supply (NES-350-5)
Product Features:
1:100% full load burn-in test
2:Protections: Short circuit / Overload / Over voltage / Over temperature
3:AC input range selectable by swith
4:Forced air Cooling by built-in DC fan
5:Withstand 300VAC Surge input for 5 seconds
6:Built-in constant current limiting circuit
7:Built-in cooling Fan ON-OFF control
8:LED indicator for power on
9:Low cost / High reliability
10:Fixed switching frequency at 100KHz
Product Specifications :
Model | NES-350-5 | |
Input | Voltage Range (Note 4) | 90 ~ 132VAC / 180 ~ 264VAC by switch 254 ~ 370VDC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Typ.) | 7A/115VAC 4A/230VAC | |
LEAKAGE CURRENT | <3.5mA / 240VAC | |
INRUSH CURRENT (Typ.) | 40A/115VAC 60A/230VAC | |
EFFICIENCY (Typ.) | 78% | |
Output | RATED CURRENT | 60A |
DC VOLTAGE | 5V | |
RATED POWER | 300W | |
CURRENT RANGE | 0-60A | |
VOLTAGED ADJ. RANGE | 4.5~ 5.6V | |
RIPPLE & NOISE (max.) Note.2 | 150mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±3.0% | |
LOAD REGULATION | ±0.5% | |
LINE REGULATION | ±0.5% | |
HOLD UP TIME | 20ms/230VAC 16ms/115VAC at full load | |
SETUP, RISE TIME | 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load | |
Protection | OVER VOLTAGE | 5.75 ~ 7.5V Protection type :Shut down O/P voltage, re-power on to recover |
OVER LOAD | 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed |
|
OVER TEMPERATURE | 90 5 (3.3~7.5V); 85 5 (12~15V); 80 5 (24V);75 5 (27~48V) (TSW1) Detect on case Protection type : Shut down O/P voltage, recovers automatically after temperature goes down |
|
Safety | WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS | UL60950-1 approved | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
Environment | WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
WORKING TEMP | -20 ~ +60 (Refer to output load derating curve) | |
TEMP. COEFFICIENT | ± 0.03%/℃ (0 ~ 50℃) | |
STORAGE TEMP., HUMIDITY | -20 ~ +85 , 10 ~ 95% RH | |
VIBRATION | 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes | |
Others | DIMENSION | 215*115*50mm (L*W*H) |
MTBF | 234.3K hrs min. MIL-HDBK-217F (25 ) ℃ | |
Note | 1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature 2:Rippled & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor 3:Tolerance: includes ast up tolerance, line regulation and load regulation 4:Please connect positive pole of input voltage with mark "L" of terminal block, connect negative pole of input voltage with mark "N" of terminal block, using DC voltage for input voltage. |
Write Your Own Review